K2E Tek Point - Professional Broadcasting Product

- 3 Reclocked DSC outputs.
- Full EDH monitoring with    LEDs for on card    error signaling.
- High returnloss and extended cable    equalization(typ.350M) on SDI    input(necessary to maintain bit-integrity for EDH)
- 3 reclocked SDI outputs.
- The outputs can be configured as follows:
* 4 times composite.
* Y/C and 2 composite outputs simultaneously.
* Y/Cb/Cr and 1 composite output    simultaneously.
* RGB and 1 composite output simultaneously.
* Selective Sync on RGB.
* Selective transparent vertical blanking.
- Supports NTSC, PAL, PALN and PALM.

Rear Connector

Specifications for SA-204
Digital Input - - - - - - - - - - - - - - - - - - -
Input Format	270Mb/s
Input Level	800mV p-p, 10% 75
Return Loss	18 dB at 270MHz

Digital Output(Reclocked) - - - - - - - - - -
Serial Data Rate	270Mb/s
Output Level	800mV p-p, 10% 75
DC Offset	500mV max
Rise and Fall Times	450ps to 1000ps
Jitter	550 ps p-p timing, 480 ps
	p-p
10Hz HPF

Analog Output- - - - - - - - - - - - - - - - - -
Y Output	1 V p/p incl. 300mV sync
	75
	700mV p/p 75
Cr Output	700mV p/p 75
Cb Output	700mV with selectable
	300mV
RGB Outputs	sync, 75
Composite Output	1V p/p incl, 300mV sync,
	75
Return Loss	40dB min. At 5MHz


Performance- - - - - - - - - - - - - - - - - - -
DA's Resolution	10bits(8bits internal
	processing)
Frequency	-0.3dB @4.5mHz
Response Luma
Frequency	-1.2dB@2mHz
Response Chroma
Signal to Noise	70dB
Ratio
Differential Gain	1%
Differential Phase	1
K-factor 2T	0.3%
Gain Stability	1%
Horizontal Jitter	3ns
Overshoot	0.2%

Electrical & Temperature- - - - - - - - - - -
Power	+7V/700mA, -7V/750mA
Temperature	+10<Ta<+45
Weight